High-performance molecular-separation ceramic membranes derived from oxidative cross-linked polytitanocarbosilane

Polytitanocarbosilane (TiPCS)-derived ceramic membranes were fabricated using a pre-ceramic polymer. Special attention was focused on a process of thermal-oxidative curing that was used to induce cross-linking and the effect of this process on the ceramic yield, thermal stability, oxidation resistance, and microstructure of TiPCS. The cross-linked TiPCS powders showed a ceramic yield and thermal stability that were higher than that from the non-cross-linked version. In addition, the cross-linked TiPCS with uniform micropores showed higher levels of N₂ and CO₂ adsorption capacity, BET surface area, and micropore volume than the non-cross-linked versions, and the cross-linking process enhanced the stability of the pore structure at high temperature. The cross-linked TiPCS membranes showed high H₂ permeance (1.49 × 10⁻⁶ mol/(m² s Pa)) with sub-nanopores (H₂/SF₆ selectivity: 12 000, H₂/N₂: 10), and in addition higher oxidation resistance than their non-cross-linked counterparts. Furthermore, the influence of the concentration of the TiPCS precursor coating solution was optimized and the hydrothermal stability of the membranes at high temperatures was also evaluated. The optimized membrane demonstrated great performance for the pervaporation removal of methanol in binary azeotropic systems of either MeOH/butyl acetate or MeOH/toluene, and it also showed high hydrothermal stability with excellent dehumidification performance under high temperatures.     

Novel direct Z-scheme AgI/N–TiO2 photocatalyst for removal of polluted tetracycline under visible irradiation

In the study, we doped N into TiO₂ lattice to narrow its band gap energy. Then, the synthesized N doped TiO₂ material was combined with AgI to form AgI/N–TiO₂ (ANT) direct Z scheme materials. The synthesized materials were utilized for photocatalytic removal of tetracycline (TC) using visible irradiation as an excitation source. We also conducted radical scavenging experiments to determine photocatalytic degradation mechanism. We investigated that these photo-excited electrons (e⁻) in N–TiO₂ conduction band tended to combine with the left holes (h⁺) in AgI valence band maintaining h⁺ in the valence band of the N–TiO₂ and e⁻ in the conduction band of the AgI. The remained e⁻ and h⁺ have high redox potential to initiate for photocatalytic decomposition of TC. Thus, the TC degradation by the ANT materials were significant greater than those by single components (AgI or N–TiO₂). We also investigated that the TC degradation by the ANT-30 material, which the AgI: N–TiO₂ molar ratio was 30%, exhibited that highest degradation efficiency. Finally, the ANT photocatalyst exhibited excellent stability during TC degradation processes supporting for its promising potential application in practical systems.     

Silica/mullite fiber composite membrane with double-layer structure for efficient sub-micrometer dust removal

Here, we developed silica/mullite fiber composite membranes with double-layer structure by a simple vacuum procedure for the removal of sub-micrometer dust. The support with three-dimensional skeleton structure exhibited high porosity (higher than 90%), low density (lower than 0.25?g/cm³) and high compressive strength (higher than 0.55?MPa) at 1000?°C. By controlling the mass ratio of silica sol to mullite fiber, we can obtain uniform and complete filtering layers with different thicknesses. The composite membranes exhibited high PM filtration efficiency with 99% for 1–10?µm, 97% for 0.5?µm and 90% for 0.3?µm. These samples had high air flow with very low pressure drop (lower than 600?Pa when airflow velocity reached 1?m/s). These results indicated that the silica/mullite fiber composite membranes were very promising for PM pollution control in the field of hot gas filtration.     

On‐site wastewater treatment using reactive filter media

The aim of this study is to reduce the phosphate concentration in treated wastewater using a small amount of the reactive filter media, Filtralite P. Biologically treated wastewater was passed through a filter with 215 g of Filtralite P. In the laboratory, the phosphate removal efficiency was 51% at a flow speed of 0.87 m/h. Under real conditions, in an experimental stand filled with 0.5 m³ of Filtralite P, the phosphate removal efficiency was 85% and the removal efficiency of total suspended solids was 57% after a 5‐month period. The residual phosphate concentration in the filtrate from the experimental stand was 1 mg/L of PO₄‐P after the 5‐month period. The experimental filtration plant was buried in the ground, and it did not freeze and worked well under winter conditions. The results of this study can be useful in the design and development of tertiary wastewater treatment plants in view of their sustainability potential.     

Atmospheric plasma treatment of CFRP composites to enhance structural bonding investigated using surface analytical techniques

This paper considers the effects of an atmospheric plasma treatment (APT) on the surface properties of an amine cured carbon fibre/epoxy resin composite, and how those effects manifest over time. In particular, the ability of the APT to remove a thin layer of silicone-containing, proprietary, release agent (Chemlease^® 41 EZ), typically used in the production of composite components, has been investigated. It was concluded that the reduction in water contact angle (WCA) after APT for both the solvent wiped and contaminated surfaces was as a result of an increase in oxygen containing species at the surface, as determined through X-ray photoelectron spectroscopy (XPS). Further, it was found that the APT slightly reduced the failure strength of lap shear specimens for solvent wiped surfaces, whereas an increase in failure strength was observed for silicone contaminated samples. WCA and XPS results suggest that the contaminant layer was not removed, but instead transformed to a more stable inorganic form.     

运营高速公路 40m 预制箱梁拆换施工技术研究

对于运营高速公路40m箱梁拆换施工，梁体的切割、吊装、运输、架设等受作业空间和环境的限制，增加了施工困难和风险，新旧箱梁在高速公路上的长距离运输为施工增加了成本和安全风险，同时也决定了箱梁拆换的总体进度。韩河大桥梁体拆换工程按期顺利实施完成，有效化解了以上问题，取得了良好的经济、社会效益。     

Preparation of fused silica membrane with high performance for high temperature gas filtration by sealing and spray coating

In order to improve the gas permeability and thermal shock resistance of the ceramic membranes applied in high temperature gas-solid separation techniques, fused silica and graphite particles were used as the primary raw material and pore-former agent, and the spray coating based-on PVA sealing was applied to prepare the separation membrane. These approaches remarkably decreases filtration resistance by increasing support permeability and reducing the intrusion of ceramic membrane forming particles into the support as well as the thickness of the membrane. The fabricated membrane had an average pore diameter of 9.85?μm and a gas permeability value of 8.2?×?10⁴?m³/(m² h bar), its dust removal efficiency reached 98.6%.     

Ion Exchange of Selected Group II Metals and Lead by Crystalline Silicotitanate and Competition for Cs Exchange Sites

ABSTRACT

A series of batch contact tests were conducted to evaluate the exchange behavior of Ba, Ca, Pb, and Sr onto crystalline silicotitanate (CST) in support of an expedited Cs removal and pretreatment system at the Hanford site. Binary Na/M²⁺ and ternary Na/Cs/M²⁺ isotherms were generated to understand selectivity, capacity, and competitive impact of each analyte on Cs uptake from a simple 1 M NaOH/4.6 M NaNO₃ simulant. Analyte loading from a 0.1 M NaOH/5.5 M NaNO₃ simulant was assessed to determine the effect of hydroxide concentration on binary Na/M²⁺ isotherms. Results from binary and ternary isotherms indicated that Group II metals Ca, Sr, and Ba (and Pb) do not impact CST performance toward Cs removal at concentrations expected in Hanford tank-waste supernate.